RediVac® means ready for vacuum service, now.
 
The UC Components, Inc. proprietary RediVac® system ensures that every fastener and seal you order from us arrives ready to install immediately – saving you time, effort, and money.
 
The proper handling of hardware and fasteners for your vacuum applications cannot be taken lightly. The value of a cleaned & vacuum-baked O-Ring and a properly vented screw, nut, or washer may seem trivial but their overall performance and savings for you (both in cost and time) can be measured.
 
UC Components performs rigorous testing quantifying the value added benefits of vented hardware and the use of our O-Rings. Through Residual Gas Analysis (RGA) and computerized pump curve plotting with fixed volumes, clean vented hardware and proper seals have demonstrated a major reduction in pre-process vacuum conditioning.
 
How does our RediVac® process benefit you and your system?
  • Faster pump-down via greatly reduced surface H2O
  • Enhanced process reliability via greatly reduced hydrocarbon contamination
  • Improved traceability via available full certification with RGA graph
  • Certified Class 100 packaging with nitrogen purge & vacuum seal
  • Cleaning, baking, & packaging performed in ISO Class 5 Cleanroom
  • Seven standard RediVac® finishes available with Vacuum Bake finish: Ag, Au, ENP (Ni), MoS2, WS2, EP, & Precision Cleaned
  • Fasteners available in stainless steel and other base materials, metric, & inch
  • Fasteners available in vented, non-vented, & custom configurations
  • Color-coded labeling system for easy identification
How does the process work?
This proprietary process reduces surface particulates and other contamination by utilizing a multi-stage cleaning, inspecting, and packaging process which is all done inside of our top-of-the-line certified Class 100/ISO Class 5 Cleanroom. 
Step 1: Ultrasonic cleaning process
Step 2: Close inspection
Step 3: State-of-the-art vacuum packaging
 
By reducing additional vacuum preparation steps, our RediVac® products help you run faster and leaner.
 
Why choose UC’s RediVac® products for your system?
UC Components, Inc. knows vacuum systems. As the industry leader we provide the right solutions, following stringent quality standards, for your specific applications. UC’s RediVac® Vented Fastener and O-Ring product lines are engineered specifically to help eliminate virtual leaks, improve pump-down times, faster evacuation of vacuum systems, and enhance the overall performance of your high vacuum and ultra high vacuum systems.
 
UC’s RediVac® vented fasteners
We offer a wide selection of vented screws, nuts, and washers manufactured from a variety of vacuum-compatible materials and are available in a wide range of Inch and metric sizes to meet your needs. 



UC’s RediVac® precision cleaned & vacuum baked O-Rings
UC Components’ RediVac® O-Rings are available in a wide range of sizes that are manufactured to industry standard AS568 sizes. If you can’t find RediVac® O-Rings in the size or material you need, please contact us directly.


 
The RediVac® line of cleaned and vacuum-baked fluoroelastomer (FKM) O-Rings is designed to deliver a ready-to-use seal that offers an added level of cleanliness assurance by minimizing residual hydrocarbons and water vapor. Our O-Rings significantly reduce outgassing and residual surface contaminants in your system. Our baking process is designed primarily for the reduction of water vapor and limited volatile organics while not significantly altering the O-Ring hardness.
 
We are always here to help you!
Since 1974 UC Components, Inc. has been known for providing fastener and seal products dedicated to improving performance and integrity of vacuum systems and other clean-critical environments. Our proprietary RediVac® system guarantees that your fasteners and seals arrive ready to install in your HV, UHV, or EUV system.
 
View our parts catalog to find the HV, UHV, EUV system components you need, request a quote, or contact us for more assistance and additional information.